Din 7991 - Hexagonal Countersunk Socket Head Cap Screws
SPP METAL AND ALLOYS Leading Manufacturer,Exporters and Suppliers of Fasteners in Mumbai . Hexagonal Countersunk Socket Head Cap Screws are are mainly used in applications which require a visually pleasing fastener with minimal load bearing capabilities. So, please note that these screws are not intended to be used in high strength applications. Sockets whose wear resistance is to be protected in the long run can use these screws instead of high strength countersunk screws. It is available in stainless steel, carbon steel, and alloy steel to bear more wear and tear while also making it more corrosion resistant.
The procedure to tighten these in place on the surface is to apply the recommended level of torque on the nut while inserting and holding the key into the socket. If there is no sufficient space on the surface for wrenches to create an opening for screws, then the head of these countersunk socket screws is in the neat sitting of the screws on the surface and in the smooth construction of structures.
Material & Grade
DIMENSIONAL STANDARDS: IS 6761, DIN 7991, BS 4168, BS 2470, ASME B18.3.5M
SIZE RANGE: Metric: M3 to M24
Inches: 3/16” to 5/16”
FLANGE BUTTON SOCKET SCREWS DIMENSIONS
DIN 7991 ASME B18.3
DIN 7991 – HEXAGON SOCKET COUNTERSUNK HEAD CAP SCREWS
THREAD D | M3 | M4 | M5 | M6 | M8 | M10 | M12 | (M14) | M16 | (M18) | M20 | (M22) | M24 | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
P | 0,5 | 0,7 | 0,8 | 1 | 1,25 | 1,5 | 1,75 | 2 | 2 | 2,5 | 2,5 | 2,5 | 3 | |
a | 2° | 90° | 60° | |||||||||||
0 | ||||||||||||||
b | l?125mm | 12 | 14 | 16 | 18 | 22 | 26 | 30 | 34 | 38 | 42 | 46 | 50 | 54 |
125<l?200mm< td=””></l?200mm<> | – | – | – | 24 | 28 | 32 | 36 | 40 | 44 | 48 | 52 | 56 | 60 | |
l>200mm | – | – | – | – | – | 45 | 49 | 53 | 57 | 61 | 65 | 69 | 73 | |
c | approx. | 0,2 | 0,3 | 0,3 | 0,3 | 0,4 | 0,5 | 0,5 | 0,5 | 0,5 | 0,5 | 0,5 | 1 | 1 |
dk | nominal=max. | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 27 | 30 | 33 | 36 | 36 | 39 |
min. | 5,7 | 7,64 | 9,64 | 11,57 | 15,57 | 19,48 | 23,48 | 26,48 | 29,48 | 32,38 | 35,38 | 35,38 | 38,38 | |
da | max. | 3,6 | 4,7 | 5,7 | 6,8 | 9,2 | 11,2 | 13,7 | 15,7 | 17,7 | 20,2 | 22,4 | 24,4 | 26,4 |
ds | nominal=max. | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 24 |
min. | 2,86 | 3,82 | 4,82 | 5,82 | 7,78 | 9,78 | 11,73 | 13,73 | 15,73 | 17,73 | 19,67 | 21,67 | 23,67 | |
e | min. | 2,3 | 2,87 | 3,44 | 4,58 | 5,72 | 6,86 | 9,15 | 11,43 | 11,43 | 13,72 | 13,72 | 16 | 16 |
k | max. | 1,7 | 2,3 | 2,8 | 3,3 | 4,4 | 5,5 | 6,5 | 7 | 7,5 | 8 | 8,5 | 13,1 | 14 |
r | min. | 0,1 | 0,2 | 0,2 | 0,3 | 0,5 | 0,5 | 1 | 1 | 1 | 1 | 1 | 1 | 1,6 |
s | nominal | 2 | 2,5 | 3 | 4 | 5 | 6 | 8 | 10 | 10 | 12 | 12 | 14 | 14 |
min. | 2,02 | 2,52 | 3,02 | 4,02 | 5,02 | 6,02 | 8,025 | 10,025 | 10,025 | 12,032 | 12,032 | 14,032 | 14,032 | |
max. | 2,1 | 2,6 | 3,1 | 4,12 | 5,14 | 6,14 | 8,175 | 10,175 | 10,175 | 12,212 | 12,212 | 14,212 | 14,212 | |
t | nominal=max. | 1,2 | 1,8 | 2,3 | 2,5 | 3,5 | 4,4 | 4,6 | 4,8 | 5,3 | 5,5 | 5,9 | 8,8 | 10,3 |
min. | 0,95 | 1,5 | 2,05 | 2,25 | 3,2 | 4,1 | 4,3 | 4,5 | 5 | 5,2 | 5,6 | 8,44 | 9,87 |
THREAD D | M3 | M4 | M5 | M6 | M8 | M10 | M12 | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
l | lengths ls and lg | |||||||||||||||
nominal | min. | max. | ls min. | lg max. | ls min. | lg max. | ls min. | lg max. | ls min. | lg max. | ls min. | lg max. | ls min. | lg max. | ls min. | lg max. |
8 | 7,71 | 8,29 | – | 3,2 | – | 4,4 | – | 5,2 | – | 6,3 | ||||||
10 | 9,71 | 10,29 | – | 3,2 | – | 4,4 | – | 5,2 | – | 6,3 | – | 8,2 | ||||
12 | 11,65 | 12,35 | – | 3,2 | – | 4,4 | – | 5,2 | – | 6,3 | – | 8,2 | – | 10 | ||
16 | 15,65 | 16,35 | – | 3,2 | – | 4,4 | – | 5,2 | – | 6,3 | – | 8,2 | – | 10 | ||
20 | 19,58 | 20,42 | – | 3,2 | – | 4,4 | – | 5,2 | – | 6,3 | – | 8,2 | – | 10 | – | 11,8 |
25 | 24,58 | 25,42 | 10,5 | 13 | – | 4,4 | – | 5,2 | – | 6,3 | – | 8,2 | – | 10 | – | 11,8 |
30 | 29,58 | 30,42 | 15,5 | 18 | 12,5 | 16 | – | 5,2 | – | 6,3 | – | 8,2 | – | 10 | – | 11,8 |
35 | 34,5 | 35,5 | 17,5 | 21 | 15 | 19 | – | 6,3 | – | 8,2 | – | 10 | – | 11,8 | ||
40 | 39,5 | 40,5 | 22,5 | 26 | 20 | 24 | 17 | 22 | – | 8,2 | – | 10 | – | 11,8 | ||
50 | 49,5 | 50,5 | 30 | 34 | 27 | 32 | 21,7 | 28 | 16,5 | 24 | – | 11,8 | ||||
60 | 59,4 | 60,6 | 31,7 | 38 | 26,5 | 34 | 21,25 | 30 | ||||||||
70 | 69,4 | 70,6 | 36,5 | 44 | 31,25 | 40 |
THREAD D | (M14) | M16 | (M18) | M20 | (M22) | M24 | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
l | lengths ls and lg | |||||||||||||
nominal | min. | max. | ls min. | lg max. | ls min. | lg max. | ls min. | lg max. | ls min. | lg max. | ls min. | lg max. | ls min. | lg max. |
20 | 19,58 | 20,42 | ||||||||||||
25 | 24,58 | 25,42 | – | 13 | ||||||||||
30 | 29,58 | 30,42 | – | 13 | – | 13,5 | ||||||||
35 | 34,5 | 35,5 | – | 13 | – | 13,5 | – | 15,5 | – | 16 | ||||
40 | 39,5 | 40,5 | – | 13 | – | 13,5 | – | 15,5 | – | 16 | – | 20,6 | ||
50 | 49,5 | 50,5 | – | 13 | – | 13,5 | – | 15,5 | – | 16 | – | 20,6 | – | 23 |
60 | 59,4 | 60,6 | 16 | 26 | – | 13,5 | – | 15,5 | – | 16 | – | 20,6 | – | 23 |
70 | 69,4 | 70,6 | 26 | 36 | 22 | 32 | 15,5 | 28 | – | 16 | – | 20,6 | – | 23 |
80 | 79,4 | 80,6 | 36 | 46 | 32 | 42 | 25,5 | 38 | 21,5 | 34 | – | 20,6 | – | 23 |
90 | 89,3 | 90,7 | 42 | 52 | 35,5 | 48 | 31,5 | 44 | 27,5 | 40 | – | 23 | ||
100 | 99,3 | 100,7 | 45,5 | 58 | 41,5 | 54 | 37,5 | 50 | 31 | 46 | ||||
70 | 69,4 | 70,6 | 36,5 | 44 |
Din 7991 - Hexagonal Countersunk Socket Head Cap Screws
Quality Assurance
We manufacture high quality fasteners. All material is manufactured as per standard and we do not compromise on quality.
Accuracy
We manufacture fasteners which are in accurate dimensions. We follow accurate manufacturing process to ensure that the products remains competitive.
Customization
With our team of experts, we can manufacture all types of fasteners as per customer’s requirement and drawings.
Timely Delivery
Consumer satisfaction is our key feature and we take great pride in delivering products on time.